This is an active 35m-150m intelligent IR illuminator. It is made up by a sensor and the special intelligent control circuit board. There is a photocell of brightness of infrared light and unique intelligent control circuit in Scene Intelligent IR Illuminator. When the camera is watching at short distance with IR illuminator and the reflected back infrared light is very strong which makes exposure/spot at the picture(Pic 1), the photocell will intelligently decrease the power of the illuminator so the infrared light becomes soft and uniform irradiation(Pic 2). When the camera is watching at long distance, the reflected infrared light is weak; the intelligent circuit will enhance the power of illuminator automatically improving the brightness of infrared light to stronger and longer. The screen is clearer than before.
• Intelligent infrared technology, no blind area when lack of background light or white spot/over exposure when the infrared light is too bright at both indoor and outdoor environment. • High quality, high effect LED increases white light emission efficiency. The operating temperature rises only 60% to the normal LED, which prolongs the lifetime of the lamp to average 50000hours. • It can deliver a constant level of brightness of IR light, intelligent control the performance of infrared light when the camera switch to different distance. • Elaborate design of the internal structure. • High light transmittance toughened and hidden light glass • It has the advantages of small size, safe and inconspicuous. • Aluminum Die-casting Housing, great heat dissipation ability, elegant appearance and low weight. • Also a regulated low power input circuit which allows the illuminator to be powered directly by 12VDC/24VAC electric source. • IP67 protection level, it is suitable for all kind of bad environment. • Using the weatherproof Aluminum Die Casting housing and variable angle ''U'' bracket can reduce installation cost and easy and quick mounting. • Improve the performance of the weak light camera, thereby enhancing the picture effects at night.
Note: Power supply is not in the package, we recommend this power adapter - SKU: PJ0015.
LED: Tyntek LED chip, High brightness, Long life
Numbers of LED: 18 Powerful LED ,12 less powerful LED
Connection ①DC12V/AC24V Input Voltage（electrode less） ②DC12V/AC24V Input Voltage（electrode less） ③Remove Control Port, plug to Anode''+'' DC:3.3-36V（Red wire） ④Remove Control Port, plug to Cathode''-'' DC:3.3-36V（Black wire） ⑤Link to IR-CUT Port of cameras (if have)（Green wire） ⑥Link to IR-CUT Port of cameras (if have)（Yellow wire） ⑦Intelligent Brightness Sensitivity Control ⑧IR-CUT Sensor ⑨IR-CUT Sensitivity Control
Instruction 1.Remove Control: Under night mode. When IR Illuminator is working, connect ③ and ④ with DC:3.3-36V power can stop IR Illuminator working. Cut off the connection of power ③ and ④, IR Illuminator return to work at the same time. 2.Camera IR-CUT: Under night mode. When IR Illuminator is working, connect ⑤ and ⑥ with IR-CUT Port of cameras can control IR-CUT of the camera. 3. Intelligent Brightness Sensitivity Control: Adjust sensitivity of intelligent brightness based on differernt cameras and situation. Take off the screw on ⑦ and adjust inside potentiometer. (More sensitive rotate clockwise) 4. IR-CUT Sensitivity Control: Adjust sensitivity of IR-CUT based on differernt cameras and situation. Take off the screw on ⑦ and adjust inside potentiometer. (More sensitive rotate counter-clockwise) Warning It is hot ouside when the IR Illuminator is working. Do not touch until cool for several minutes.
1 XOutdoor Active 35m-150m intelligent IR Illuminator 2 X Cable 1 X Wrench