|Qty||3 - 10||11 - 20||21 - 50||51 - 100||101 - *|
This is a 1.4 inch mini metal camera housing with audio hole. You can choose suitable board camera, lens and line for DIY a perfect camera.
Notice: Because of different wire outlets on the back cover, this case is not suitable for all cameras. It can be fitted to some cameras on our website as following:
Note: We are willing to customize logo for you to adhere on the camera housing, if you need any logos, please contact us at firstname.lastname@example.org
Posted by J**********n on 26th Mar 2014
This is an excellent non expensive well made housing. I am always pleased when my camera boards are housed in this housing as it gives the most robust safety containment for the board. I don't do model aeroplane use with it, but would compare it to a flight black box in that the camera would survive. I use them in home CCTV.
Posted by R**n on 25th Jan 2014
Planned to use it for FPV use- as could be expected it IS heavy- but really robust and clean looking
Posted by Unknown on 25th Jan 2014
I have purchased this housing and also the plastic one. I prefer the plastic due to weight. However both seem to have the same problem and that is that with the camera fitted inside there is a can on the back of the camera board that sticks out to far and does not allow the back plate of the housing to fit flush. Other than that they are fine housings.
600TVL SONY SUPER HAD CCD D-WDR Color Board Camera with OSD Menu DNR
Reply by SC2000 on 27th January 2014
Dear Sir, Thanks for your feedback, we appreciate it. There is a crystal resister on the back of the camera board. Please check the below video, about 1:15 in the video, the technician shows you to move the crystal resistor aside so that you can install the backing plate. http://www.youtube.com/watch?feature=player_embedded&v=Kevwuv-Ldf4 Any problems please feel free to contact us. SecurityCamera2000 Team email@example.com
Posted by d**********r on 25th Jan 2014
if you fly fpv this is a realy needed item to protect the great security cam 2000 camera
Posted by H*****n on 25th Jan 2014
Nice metal housing for protecting your cam.
It is not waterproof but for a occasional drop it will do just fine.
My SONY Super HAD CCD 600TVL D-WDR DNR Board Camera For FPV fits perfect after cutting off the pre-cut edges of the camera pcb board.
Posted by Tm on 12th Dec 2013
Packed inside a nice b ox with plenty of bubble wrap qlong with the camera and leads, also well packaged. HOWEVER no screw pack!! I spent hours trying to source locally, finally found some that will do. You should take more care.
Reply by SC2000 on 04th January 2014
Dear Tim, Thanks for your feedback. I am sorry about the missing screws. We will pay more attention for the shipment in the future. If you have any other problem, please contact us and we will do our best to help you. BR, SecurityCamera2000 Team
Posted by R**o on 26th Nov 2013
I found it fitted perfectly. Is totally complementary to the SONY Super HAD CCD 600TVL D-WDR DNR Board Camera For FPV.
I have no hesitation in recommending this camera housing to anyone looking for the best. You will not be dissappointed
Posted by M****l on 11th May 2013
It's WAY too small for the 600TVL I purchased here.
The housing fits the camera you have (PZ420/CMQ1993X).
You need to cut the outer edge of the camera PCB board to put it into the housing.
You can check the below video for the installation instruction.
Any problems please send us email to info@SC2000.com.
Posted by MY on 14th Nov 2012
IT'S ECONOMIC AND PRACTICAL. I BOUGHT THIS UNIT FOR MY MINI CAM, AND IT FITS WELL. WORTH THE PRICE!
Posted by G*g on 26th May 2012
To fit 600 tvl sony super had inside you have to bend capacitor than cut unused plug.
I have followed instructions and broke my camera because of this.
Even if you do everything its still at least 1mm to small. so you have to sqeeze cam inside.
U bracket came with rust on it...
Review follow up by SecurityCamera2000.com Team on 5th June 2012
Thank you for your product review. We appreciate it.
That is due to wrong operation to the camera and cause damage or short-circuit on the PCB board. Settled this case by arrange replacement to the customer.
Any problems please feel free to contact us via email: firstname.lastname@example.org