New ProductsThis is a wide dynamic range CCD Board include OSD menu control cable, and its biggest feature is the OSD menu can be achieve in a line, and it needn’t the traditional button of camera tail so that the operation can be simple, especially fit for the waterproof camera.
The Wide Dynamic Range (WDR) function of a camera is intended to provide clear images even in back light environment where intensity of illumination can vary excessively, namely when there are both very bright and very dark areas simultaneously in the field of view of the camera. WDR enables capture and display of both bright areas and dark areas in the same frame, in a way that there are details in both areas, i.e. bright areas are not saturated, and dark areas are not too dark.HME(Highlight Masking Exposure)
•Masking for the light areas and make compensation to achieve the correct exposure within a specific area selection, this time frame will not receive too much light too dim to not recognize the feeling.(please use a fixed iris lens)
WDRC(Wide Dynamic Range Compensation)
•In the same screen if there are large contrasts situation will result in over-exposed, too dark, when the screen starts WDRC function can significantly improve contrast.
SLC(Side Light Compensation)
•Based on use of the lens may be some amount of light shot into the middle region than the edge area to the large, bright middle at this time will show the edge of the dark. This feature is made for compensation to the edge of uniformity the same picture quality.
DNR digital noise reduction
•In the illumination can save a lot of storage space.
OSD menu function
•Special patented design features to the icon display mode, intuitive and clear, so that users can set the content clear. Chinese/English language options.
Support Day& Night function
•When using the electronic conversion function day and night is available when Burst ON/OFF choice of remaining C color signal or removed. This feature is specifically designed for LCD monitors, because some color LCD can’t display black and white signal, so setting increased ON/OFF selection.
Gamma adjust function
•When using different image reduction device, you can set different gamma values, to achieve the desired reduction effect.
Privacy masking function
•When a region doesn't need the screen is displayed, can be protected in the region.
BLC(Back Light Compensation)
•Objects in the picture in the back of a bright light source, it can be caused due to the backlight dark part of the photo objects for backlight compensation, to be more distinct clear photo objects.
CCD dead pixel repair
•CCD dead pixels and automatically repair
MOTION DETECTION/ALARM
•Set the object detection region, when there are changes that start sending signals(DVR or Alarm-Bell)
Wide Voltage Setting
•DC power supply, voltage range between 10V~16V work; use AC power







(Reminding: The power adapter is not included. You could add this DC12V 2A power adapter -SKU: PJ0005 or the best sellers one, DC12V 2A power charger - SKU: PZ0374.)
|
Model |
KR-878ADWC |
|
Image Sensor |
1/3'' SONY SUPER HAD Ⅱ CCD |
|
Horizontal Resolution |
540TVL |
|
Effective Pixel |
PAL: 752(H) x 582(V) NTSC:768(H) x 494(V) |
|
Signal System |
PAL/NTSC |
|
Scanning Mode |
2:1 Interface |
|
Synchronization |
Internal |
|
Gamma Correction |
0.3-1.0 setting |
|
S/N Ratio |
>50dB(AGC OFF) |
|
Electronic Shutter Speed |
PAL:1/50-1/100,000s;NTSC:1/60-1/100,000 |
|
Min. Illumination |
0.05LUX/F1.2 |
|
Auto Gain Control |
OFF~33dB |
|
White Balance |
Multi mode |
|
Color temperature adjust |
Support |
|
Motion Detection |
64 regions |
|
Privacy Masking |
4 regions |
|
Back Light Compensation |
OFF/ON(Level adjustment 0~50) |
|
Highlight Masking Exposure |
OFF/ON(Level adjustment 0~50) |
|
Wide Dynamic |
OFF/ON 100dB(max) |
|
Color to Black |
Support |
|
Digital Noise Reduction |
Support |
|
Flicker |
Support |
|
Mirror |
Support |
|
Sharpness Adjustment |
Support |
|
Lens Focus |
OSD |
|
Function Control |
DC drive |
|
Lens Aperture Adjustment |
Level adjustment 0-50 |
|
Video Output |
1.0Vp-p 75 ohm BNC output |
|
Power |
12V DC (±10%) |
|
Operation Tem. |
–10C~50C |
|
Operation Environ. |
10%~90% |