2.4G Wireless 7inch TFT LCD video DVR With 15M IR Color Camera

This is a set of 2.4GHz wireless camera kit, included a 7 inch LCD monitor with video recording function and one wireless 15m IR night vision color camera. It can be used as baby monitor as well.

This wireless monitor receiver only has 1channel video input, it can't record video, you can only monitor the image. The monitor receiver can receive 4CH 2.4G wireless signal, but can only record 1channel video signal.

Features:

• 2.4GHz 4-Channels Wireless AV Color 7 inch TFT LCD Monitor
• Built-in microphone for audio monitoring Receiver inside easy installation
• PAL/NTSC System
• 2.4 receiver channel CH1: 2414MHz, CH1: 2432MHz, CH1: 2450MHz, CH1: 2468MHz.
• Active Area: 154.08(mm)*86.58(mm)
• Resolution: 480(H) x RGB x 234(V)
• Receiver Channel: 4CH
• Brightness: 200cd/square meter
• Contrast Ratio: 300:1
• Db Level: -90dB
• Composite Video (AV): One-way AV input
• Min.100m transmission distance without blocks
• Remote control with full functions. On screen display (OSD) menu
• Support Auto Motion Detection and Recording
• Better video and audio quality, output: 720 X 480 X 30 fps
• Audio + Video record with time/date stamp
• AVI Recording format Support TV OUT function
• Auto overwrite when the memory is full
• Rotating camera: 360 degrees
• Runs with Windows 98/SE/ME/2000/XP
• Support Max 32GB TF Card
• Size: length: 190mm X width: 22mm X height: 140mm (without antenna)/236mm (with antenna)

More Features

Specifications

Transmission Frequency		ISM 2,400-2,483 MHz 4 Frequency Point
Modulation Type		FM
Transmission Distance		100m(Open area)
Operating Temperature		-10 C- + 50 C/ +14 -+122F
Storage Temperature		-20 C- + 60 C -4 - +140F
Operating Humidity		85%RH
Camera	Imaging Sensor	CMOS
	CMOS Total Pixels	628×582(PAL); 510×492(NTSC)
	View Angle	PAL: 62  NTSC: 46
	Minimum Illumination	O Lux (IR ON)
	Consumption Current	80mW
	Power Supply	DC 5V 1A
	Night Vision Range	15m
	Dimensions(W x L x H)	48mm*48mm*25mm
	Weight	70g

 

Operation:

• Open the packing box, adjust product to appropriate position, fixed it to stable.
• Insert TF card to TF card trough.
• Power on the DVR, The equipment get into motion detection model, The DVR records video when it  detects any target moving in its shot scope(Press UP key on or chose the motion detection function, while it is open model, there is an eye icon display on preview windows.)
• Manual operation recording: Press SNAP key begin recording, Press again can stop recording. The DVR system will automatic recording and save if recording time reach 10 minutes and as have no stop key pressed.
• Playback model: Press MODE key enters into playback mode while file saves in memory card, then if screen display NO FILE, it means it has no file in TF card.
• Can through A/V wire connect monitor output video while you were Playback.
• Can also take out TF card, Play video on computer etc.
• User can set different option(see menu instruction)

More Information

PL1698-User-Manual

Package

• 1X 2.4GHz 7inch Wireless TFT LCD Monitor Receiver Video DVR
• 2X Power Support
• 1X Remote Controller
• 1X User Manual
• 1X AV cable
• 1X 2.4G Wireless camera