This is combined product,mainly consisting of a DVR, two 2.4G Wireless Pinhole Cameras with audio Li-Battery MIC, a remote controller, two power adapters. This product with motion detection, 2.4 G video recording and built-in vibration alert function, is all-featured and powerful.
2.4 G wireless video recording
Motion detection
Remote control of video recording
2.4G Wireless Pinhole Camera with Audio Li-Battery MIC
Mini butter-shape lens
More Features
Specifications
System
Video size
VGA(640*480) QVGA(320*240)
Motion detection
MPEG-4 single audio
Memorizer
built-in memory(about 59MB) Micro SD(TF) Card support Max 16GB
2.4G Wireless receiving
8 channel
LCD
2.4" 480*234dot
Input and Output Interface
AV output
single audio channel, video output
AV input
single audio channel, video input battery voltage output
USB interface
USB2.0
Power adapter and others
Battery
Rechargeable L1 battery 3.7V
Power adapter
Input: AC 100v-240V 50/60Hz Output: DC 5V/1A
Power consumption(recording)
1.2W
Speaker
single audio
Working temperature
0 - 40C
Storage temperature
-20 - -60C
Size
85*54*17mm
DVR:
2.4G Wireless AV Receiver System manual, remote operation.
Built-in vibration alert functionality AV in, AV out, MPEG4 Video record interchangeable standard mobile li-ion battery.
Micro SD card slot accommodates up to 16GB.
USB 2.0.
Main unit size: 85*54*17mm.
Camera Specification:
Imaging Sensor Pixels: 628*582 PAL
Horizontal Resolution: 420 TV Lines
View Angle: 80 degree
Lens Focus: 3.7mm
Vided Output Level:1Vp-p@75
Audio Output Level:1Vp-p@10K
Power Supply: 5V
Wireless Camera Specification:
Image Sensor: CMOS
System: PAL/NTSC
CMOS total pixel: 628*582( PAL),510*462( NTSC)
View angle: 62 deg
Minimum Illumination: 1.5Lux/ F1.5
Gain Control: Auto
Transmission Frequency: ISM 2400 mHz -2483 mHz
Transmission Power: 10mW
Modulation type: FM
Power supply:+5V DC, 80mA
Battery capacity: 500 mA
Working Time: 4h
Built in Microphone
Exposure time range: 1/60s ( NTSC),1/50s (PAL)
Dimensions (WxLxH): 72x23x23mm
Connect PC
Before connecting PC, you can set the product with disk drive and PC camera mode to connect PC.
The production support standard USB2.0 and you can use the standard USB data cable to connect the product to PC.
When you use USB data cable to connect the product to PC, PC will recharge the product automatically, unless you take out the battery or the battery is full of electricity capacity, and the system power is also offered by the USB interface.
When you take out the USB cable under the USB mode, the product will turn off automatically.
Connect TV(AV OUT)
Please set NTCS or PAL in the setup menu according to the local TV system.
Insert AV cable into the product, the other yellow end RCA (video) pin insert video input pin of TV, white RCA (audio) pin into TV audio pin.
Package
1 x DVR mainframe
1 x Camera
1 x 2.4G Wireless Camera
1 x Remote controller
1 x USB Cable
1 x AV cable
1 x Battery
2 x Power adapter
1 x User manual
FAQ - Frequently Asked Questions
Q: Are there two wireless cameras or one wireless / one wired camera?
A: This item has two cameras, one is wire and one is wireless.