Loading... Please wait...This product adopts the most advanced digital video and fiber high speed transmission technology, it can transmit video, data simultaneously without distortion via fiber. It adopts all digital video no compression transmit technology, supports any high resolution dynamic or stable picture transmission, and can transmit in very high quality video picture. This product can be widely used on any large surveillance project, ITS (Intelligent transport system) and community safer guard system.
Similar product: PB0288 (PB0288 is without data transmission)
Selling Points:We sell the products in pair. (a transmitter and a receiver)
If you need ST connector, we could offer a FC to ST jumper for FREE, you just need to leave us a note when checking out.


|
Video |
|
|
Video Input |
1 volt pk-pk (75 ohm) |
|
Video Input / Output Channels |
1 |
|
Video Format |
PAL / NTSC / SECAM auto-compatible |
|
Bandwidth |
8 MHz |
|
Bit Resolution |
8-bit |
|
Differential Gain |
< 1% (typical) |
|
Differential Phase |
< 0.6 |
|
Field Tilted |
<1% |
|
Weighted Signal to Noise Ratio |
> 68dB (typical) |
|
Data |
|
|
Data Channel |
1CH Reverse Data |
|
Data Protocols |
RS-485 |
|
Total Sampling Rate |
2MHz |
|
Data Rate |
0 to 300Kbps |
|
Bit Error Rate |
≤10-9 |
|
Optical |
|
|
Optical Emitter |
Laser Diode |
|
Number of Fibers |
1 |
|
Wavelength |
Default 1310nm,1550nm Optional |
|
Fiber |
Default Single-mode, Multi-mode Optional |
|
Transmission Distance |
Single-mode: 20km(12.4 miles); |
|
Connectors |
|
|
Optical Connector |
FC |
|
Video Connector |
BNC |
|
Data Connector |
Phoenix Terminal (Industrial Terminal) |
|
Other |
|
|
Power Supply |
DC 5V @ 1A |
|
Operating Temp |
-30C to +70C |
|
Relative Humidity |
0% to 95% (no condensing) |
Fiber Optic Technical Parameters:
|
Fiber Type |
Multi Mode |
Single Mode |
||||
|
Wavelength (nm) |
850/1310 |
1310/1300 |
1550 |
|||
|
Type of Fiber Interface |
FC |
FC |
FC |
|||
|
Transmission Distance (km) |
0 to 2 |
0 to 20 |
0 to 40 |
0 to 60 |
0 to 80 |
15 to 120 |
|
Transmission Power (dBm) |
-14 to -18.5 |
-7 to -16 |
-9 to -4 |
-4 to 0 |
+1 to -8 |
-5 to 0 |
|
Receiving Sensitivity (dBm) |
-31 |
-29 |
-32 |
-32 |
-34 |
-35 |
|
Optical Saturation (dB) |
-14 |
-8 |
-3 |
-3 |
-3 |
-3 |
|
Optical Loss (dBm/km) |
2.5 |
0.4 |
0.4 |
0.4 |
0.25 |
0.25 |