This mobile phone signal amplifier is specially designed for 1800MHZ mobile phone service. It is very easily to operate. Enhance cell phone signal where signal is weak.
Provide the ultimate solution in any area where cellular communications can't work well due to leak of signals.
Easy installation and operation
Indoor and outdoor antennas and no interference
It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cell phone.
A mobile phone repeater is ideal for house, home and office use.
High gain, easy installation and operation.
Full-duplex, single-port design.
Use ALC technology, adjust extent automatically
LED Light Working and Signal Condition Indicators
Big linear power, control inter modulation and scatteration stably
Dependability stand by GB6993-86 standard
Compatibility of electromagnetism according with ETS300 609-4
CE and RoHS Approved
Enhance Mobile Phone Signal Strength
Improve Communication Quality
Reduce Cell phone Radiation
Protract Cellular Battery Life
Economic Building Cost
Max Output Power
17dBm / ±3DBM Total power
17dBm / ±3DBM Total power
noise coefficient 09
More than 1000 Square Meter
AC110/220V(used AC/DC Adapter 12Vdc)
Inhale Top Antenna
Dia 170x120 mm;
Outdoor Hanging Antenna
Fix up outdoor antenna reception on housetop and point to signal tower.
Connect outdoor antenna to ''outdoor'' port in repeater machine through cable.
Connect indoor antenna(s) to ''indoor'' port in repeater machine through cable also.
Plug power adaptor into AC power socket and finish installation.
If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
If cannot call out, please adjust the direction of outdoor antenna.
If strength is not steady，please check if outdoor and indoor antenna are too close. Please ensure the outdoor and indoor antenna have distance of 20meters at least ,with a wall between and net a same horizontal line
The distance between the outdoor antenna and the amplifier is not more than 30 meters
The outdoor Antenna is not supposed close to a large antenna, high-voltage lines, transformers, or metal mesh, etc.
The distance between the indoor antenna and the amplifier is not more than 40 meters
The indoor antennas do not close to the wall as far as possible in order to increase the coverage area
The indoor antenna and the outdoor antenna are advised to stay away from each other for more than the distance as one floor to prevent the signal has been cyclic amplification
If the quality of call is not good，change the installation position of the outdoor antenna and adjustment the indicate direction of antenna.
It is best to enclose waterproof tape at the junction, and prevent moisture narrow the indoor signal coverage area
The cable try to walk a straight line, do not bend more than 90 Deg
Amplifier Package: GW 1665g; 275mmX195mmX75mm Amplifier: NW 1177g; 195mmX150mmX25mm Power Adaptor: 275g; 105mmX45mmX33mm Input cable: 1500mm Output cable: 1500mm Outdoor Antenna: GW with package: 700g; NW: 426g; 210mmX180mmX40mm Inhale top antenna: GW with package: 287g; NW: 213g D170mm X H120mm Cable: 100g/meter (By default, we ship out two 5m cables)
Additional item price:
The cable length can be customized according to customer needs, USD $6/m (6 dollar per meter) You can order more indoor top antennas to facilitate multi-floor users, 30 dollars per each. The repeater only (without antennas and cables) cost you $420 dollars.