Specifications

(Reminding: The power adapter is not included. You could add this DC12V 2A power adapter -SKU: PJ0005 or the best sellers one, DC12V 2A power charger - SKU: PZ0374.)

Overview 

Image Sensor: 1/3''SONY Super HAD Ⅱ CCD

Passed rigorous electromagnetic interference testing

HME(Highlight Masking Exposure)  

•Masking for the light areas and make compensation to achieve the correct exposure within a specific area selection, this time frame will not receive too much light too dim to not recognize the feeling.(please use a fixed iris lens)

WDRC(Wide Dynamic Range Compensation)  

 •In the same screen if there are large contrasts situation will result in over-exposed, too dark, when the screen starts WDRC function can significantly improve contrast.

SLC(Side Light Compensation)  

•Based on use of the lens may be some amount of light shot into the middle region than the edge area to the large, bright middle at this time will show the edge of the dark. This feature is made for compensation to the edge of uniformity the same picture quality.

DNR digital noise reduction  

 •In the illumination can save a lot of storage space.

 OSD menu function  

 •Special patented design features to the icon display mode, intuitive and clear, so that users can set the content clear. Chinese/English language options.

 Support Day& Night function     

•When using the electronic conversion function day and night is available when Burst ON/OFF choice of remaining C color signal or removed, This feature is specifically designed for LCD monitors, because some color LCD can't display black and white signal, so setting increased ON/OFF selection.

Gamma adjust function  

•When using different image reduction device, you can set different gamma values, to achieve the desired reduction effect.

Privacy masking function  

•When a region doesn't need the screen is displayed, can be protected in the region.

BLC(Back Light Compensation)

•Objects in the picture in the back of a bright light source, it can be caused due to the backlight dark part of the photo objects for backlight compensation, to be more distinct clear photo objects.

CCD dead pixel repair  

•CCD dead pixels and automatically repair    

MOTION DETECTION/ALARM  

•Set the object detection region, when there are changes that start sending signals(DVR or Alarm-Bell)

Wide Voltage Setting  

•DC power supply, voltage range between 10V~16V work; use AC power, the voltage range between 20V~28V to work, this design can greatly improve the life and stability of the camera.