Loading... Please wait...
The PTZ camera can not be controlled by the keyboard controller or other control device. - securitycamera2000 help
  [Advanced Search]

The PTZ camera can not be controlled by the keyboard controller or other control device.

Post on 20th of May, 2015
无标题文档

 

1.To use different power source with same standard to the camera and check if there is any video output from the camera;If so, the camera is powered properly;

2.Observe if the camera will rotate automatically to self-check when power on;

3.Check the Protocol, address and Baud rate of the eqiptment used to control camera match the ones of the camera;

4.Make sure the RS485 signal cable is connected properly (Not short-circuit/disconnect/reversely connected);

Related Articles
No related articles were found.