NVR Mobile Terminal Accessing
There are 2 Apps for NVR mobile terminal accessing, GOOLINK(using P2P technology) and VMEYE.
Please follow steps as below.
1. Click '+'.
There are three Add ways optional. You could select the one as you need.
Here is the device parameter setting interface.
2. Fill in a device name (randomly)
3. Fill in your user information
4. Fill in your password, Click 'Sure' and move to next.
Please make PIN3 PIN4 (in J4 port) short circuit for 8-10s when in power-up state, and then release.
5.Click and then you can either view the image in different channels, or view several different channels at the same time. Please refer to HELP for more information.
GOOLINK is easy to use, but sometimes not stable. If GOOLINK cannot be connected, please try VMEYE, which is more stable, but complicated in operating.
A. Click 'LIVE VIDEO'
B. Click '+' to enter the adding interface
C. Fill in a device name (randomly).
D. Fill in IP address (intranet IP is used for intranet access while outer net IP is used for access via outer net).
E. Port. 5053 as default. Here refer to mobile phone port. There are 5 ports on the NVR. They are HTTP port- 80, device port- 5050, video- 5051&5052, and mobile phone port- 5053.
HTTP and device port can be modified while video and mobile phone ports not, which will simultaneously change according to device port. If device port changes, then the video & mobile phone port will be +1, +2, +3 accordingly. For example, 1255, 1256&1257, 1258.
For outer net access, port forwarding on these 5 ports needs to be done first in the router forwarding interface.
Revising port can be made in NVR network setting interface.
F.Fill in your user and password.
Click ‘Save’ when parameter is filled properly.Back to main interface, click the little dot (see G)to view the image.
If you have any questions about this article, please feel free to contact firstname.lastname@example.org