Loading... Please wait...
Settings of SMTP/FTP/CLOUD/SAVE IN LOCAL STORAGE for YZ-Camera Series - securitycamera2000 help
  [Advanced Search]

Settings of SMTP/FTP/CLOUD/SAVE IN LOCAL STORAGE for YZ-Camera Series

Post on 11th of May, 2014

Settings for YZ-Camera Series

I. Settings in SMTP to send images by e-mail in motion detection for YZ series;
II.Settings in FTP servers to send images by e-mail in motion detection for YZ series;
III. Settings for cloud-connection for YZ series (Smart phone P2P, Version: V2.5 or higher);
IV.Settings of UC Client software to save video files in local storage when motion is detected for YZ series.


I.The settings for SMTP for YZ series:

  1. 1. Login IE on IP: 192.168.0.123 (default IP address for the camera is 192.168.0.123). If can not connect, you can first use the UC client software in the CD to search the correct IP address for the camera. The user name is "admin", password is "123456" (default).
  2. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  3. 2. Please go to the main page> "Config" (configuration)
  4. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  5. 3. "Config"> "Network"> "SMTP Account Setup" (SMTP server port changes after the SMTP server address. That is different among different e-mail service providers, you need to confirm it by yourself) --- Then, please save all the settings
  6. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  7. 4. "Storage"> Storage Settings (e-mail alert when motion is detected, you can select the period for motion from the drop-down menu ) --- Remenber to save all these settings
  8. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  9. 5. "Alarm" > "Montion Alarm" (You can adjust the sensitivity, the monitoring area, the night mode and the period for alarm according to your need. Then select "Enable" to activate the motion detector.) - - Then save everything. So far, the settings for SMTP is done.
  10. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com


II. The settings of FTP for YZ series:

  1. 1. Login IE on IP: 192.168.0.123 is (default IP address is192.168.0.123 for the camera). If can not connect, you can first use the UC client software in the CD to search the correct IP address for the camera. The user name is "admin", password is "123456" (default).
  2. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  3. 2. Please go to the main page> "Config" (configuration)
  4. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  5. 3. "Config"> "Network"> "FTP Account Setup" (in "alarm Upload", please enter the FTP server address, "FTP Port" is "21", then the FTP username and FTP file path) Then please save the settings.
  6. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  7. 4. "Storage"> "Storage Settings" (FTP alert when motion is detected. You can select the date range for motion detection from the drop-down menu) --- please save all setting.
  8. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  9. 5. "Alarm"> "Montion Alarm" (You can adjust the sensitivity, the monitoring area, the night mode and the period for alarm according to your need. Then select "Enable" to activate the motion detector.). Then save everything. So far, the settings for FTP is done.
  10. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com


III. The settings of Cloud Access for YZ series (Smart phone P2P, Version: V2.5 or higher):

  1. 1. Login IE on IP: 192.168.0.123 (default IP address is 192.168.0.123 for the camera). If can not connect, you can first use the UC client software in the CD to search the correct IP address for the camera. The user name is "admin", password is "123456" (default).
  2. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  3. 2. Please go to the main page> "Config" (configuration).
  4. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  5. 3. Please go to "Config"> "Remote Config"> "System" - "Version Info".
  6. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  7. 4. Go to "Config"> "Network"> "Network Status"> "Device Cloud ID" (if the unit is not shown, then there might be problem of DNS settings)
  8. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  9. 5. Take iPhone as an example, please search "seetong" in the App Store, then install it.
  10. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  11. 6. After installed, please fill the user name and password to login.(If you do not have username account, please register.)
  12. Instruction, IP camera, cell phone, visit-www.securitycamera2000.comInstruction, IP camera, cell phone, visit-www.securitycamera2000.com
  13. 7. After login, please click "Device List". Then fill the camera Cloud ID, "User name": admin, "password": 123456 (default). Please save the settings
  14. Instruction, IP camera, cell phone, visit-www.securitycamera2000.comInstruction, IP camera, cell phone, visit-www.securitycamera2000.comInstruction, IP camera, cell phone, visit-www.securitycamera2000.com
  15. 8.Please click the camera you added. Then P2P setting is done, just as below photo shows.
  16. Instruction, IP camera, cell phone, visit-www.securitycamera2000.comInstruction, IP camera, cell phone, visit-www.securitycamera2000.com
  17. 9. Log in IE Cloud Management: http://www.seetong.com/. Please register the account. Then you can use UC Cloud account to get access the camera after you link the account with Cloud ID of the camera.
  18. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com


IV. The settings of UC Client software for YZ series:

  1. 1. Please install the UC Client on your PC, double click the icon .Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  2. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  3. 2. Click "login" to enter.
  4. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  5. 3. Click "Config Management"> "Device Config"> "Search Camera"> Select Camera> "Add"> "OK"> You add the camera sucessfully.
  6. Instruction, IP camera, cell phone, visit-www.securitycamera2000.comInstruction, IP camera, cell phone, visit-www.securitycamera2000.comInstruction, IP camera, cell phone, visit-www.securitycamera2000.com
  7. 4. Please select the camera's IP address for setting: "Config Managment"> "Record Config"> "Detail"> "Trigger Method" (change it as "Motion Detect Record")> click "Modify strategy".
  8. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com
  9. 5. Please select the camera's IP address to the setting:Click "Config Management"> "Remote Config"> "Alarm"> "Montion alarm" (You can adjust the sensitivity, the monitoring area, the night mode and the period for alarm according to your need. Then select "Enable" to activate the motion detector.)> please save everything. So far, the settings of UC client software is done.
  10. Instruction, IP camera, cell phone, visit-www.securitycamera2000.com

If you have any questions about this article, please feel free to contact info@SC2000.com

Related Articles